QPI Forklift NumberQP22, Toyota, Gas
First NameChris
Last NameDaymond
Date25/09/2023
Time03:07 AM

Audit Questions

TYRES are free of excessive wear (above safety tyre line), damage or cracks. Intact with rim, and tight hub nuts where fitted.Yes
FLUIDS are not leaking from hydraulic cylinders, battery and coolant including hoses under forklift. Hydraulic fluid and brake fluid is at the appropriate level.Yes
OVERHEAD GUARD is in place, secure, and not bent, cracked or loose.Yes
LOAD BACK REST EXTENSION is in place and not bent, cracked or loose.Yes
FORKS are evenly spread with locking pins in place. Not bent, worn, or cracked.Yes
MAST chains are level with no obstruction, hydraulic rams not pitted or leaking. No wear, damage, looseness or chain tension in forks and backrest.Yes
ENGINE BAY is generally clean.Yes
LOAD RATING PLATE is fitted and readable. Load rating is understood.Yes
REVERSE WARNING ALARM and HORN are working and can be clearly heard.Yes
LIGHTS & BEACON are working, with no dirt, damage, or cracks in lamps. All lights are aimed correctly.Yes
MIRRORS are positioned correctly, clean with clear vision and no damage or broken glass.Yes
STEERING is smooth and responsive free of excessive play. Wheel is not loose.Yes
BRAKE PEDAL AND PARKING BRAKE work effectively and holds on an incline.Yes
CONTROL LEVERS are labelled, not loose or binding and freely return to neutral. Lift, lower, tilt operates smoothly without excessive drift.Yes
CONTROL PANEL is working and fault lights are not showing.Yes
EMERGENCY STOP is identified as a red button and cuts the motor instantly.Yes
SEAT BELT works as intended, is not damaged, oily or dirty.Yes
SEAT is not damaged including tears, secure and properly adjusted.Yes
OPERATOR’S MANUAL is located on the forklift and in readable condition.No
Defect information:

No manaul

Image ProofImage Proof
BATTERY CHARGE indicator is working, full green or 75% after raising forks, and electrolyte level adequate. Battery connections are tight, and cover is secure.Yes
FORKLIFT CHARGER (if applicable) works properly and cables are not damaged.N/A
GAS CYLINDER is sufficiently full and gas cylinder is not damaged. Check cylinder is secure. Check compliance plate visible and current.Yes
ATTACHMENTS (if equipped) function and fitted correctly, with correctly inserted securing pins, and no unusual noises or damage.N/A
Operator signature: